NWA service
Roofing Dumpster Rental in Bentonville, AR
Sized to shingle weight, not just container volume — flat-rate roll-offs delivered fast across Northwest Arkansas.
- Licensed & insured
- Same-day in Bentonville
- Flat-rate pricing
- All 17 NWA cities
Roofing Dumpster Rental across Northwest Arkansas
Shingles are heavier than almost anything else that lands in a roll-off, which is why a roofing dumpster looks nowhere near full when it hits its tonnage limit. A crew can strip a roof, stack the tear-off a few feet deep, and still be at the container's weight allowance well before the box looks loaded. Sizing by square footage of roof instead of shingle weight is the most common mistake on a tear-off, and it is an expensive one if the load gets flagged as overweight at the landfill.
Gravity Dumpster Rental Bentonville has been sizing roofing jobs across Northwest Arkansas since 2015 — eleven years of tear-offs, from single-layer three-tab reroofs to multi-layer architectural jobs on new-construction homes. Owner Michael Davis built the fleet around getting the right size on site the first time, because a mid-job swap costs a roofing crew real hours.
Every rental is flat-rate — delivery, the rental period, pickup and disposal included up to the tonnage listed for that size. Same-day and next-day delivery is available across the service area. There is no online form to fill out; call and describe the roof — square footage, shingle type, and how many layers are coming off — and get a size matched to the actual weight.
At a glance
What you get with roofing dumpster rental
- Sized to shingle weight, not just container volume
- Three-tab and architectural shingles priced and sized differently
- Flat-rate delivery, pickup and disposal included up to the stated tonnage
- Same-day and next-day delivery across Northwest Arkansas
- Built for single-layer and multi-layer tear-offs
- No contract form to wait on — call and get a size matched to your roof
- Licensed and insured, family-run since 2015
Why Roofing Debris Fills the Tonnage Before the Volume
Asphalt shingles are dense, and a tear-off compacts further once it hits the container floor. Take a roof measuring 20 squares — 2,000 square feet of roofing material, a realistic single-story home. Three-tab shingles run roughly 230–250 lb per square, so that tear-off weighs:
- 20 squares × 230 lb = 4,600 lb
- 20 squares × 250 lb = 5,000 lb
- That is 2.3–2.5 tons of shingles alone, before decking, felt paper, or drip edge.
A 20-yard container carries a 2–3 ton allowance, so a single-layer three-tab tear-off at this size fits with little room to spare — and none for a second layer.
Three-Tab vs. Architectural Shingles: The Weight Difference
Architectural (laminated) shingles are thicker and heavier than three-tab, and the two should never be sized off the same number. Architectural shingles run roughly 350–430 lb per square — noticeably more per square foot than three-tab. On that same 20-square roof:
- 20 squares × 350 lb = 7,000 lb
- 20 squares × 430 lb = 8,600 lb
- That is 3.5–4.3 tons — enough to push past a 20-yard's 2–3 ton allowance and land in 30-yard territory.
On a smaller job — a 10-square garage or porch roof — the gap still holds. Three-tab runs 2,300–2,500 lb (1.15–1.25 tons), well inside a 10-yard's 1–2 ton allowance. The same 10 squares in architectural shingles runs 3,500–4,300 lb (1.75–2.15 tons) — still workable in a 10-yard, but with a lot less margin. Add a second layer of old shingles under either type and the weight roughly doubles, which is exactly the kind of detail worth mentioning on the call.
Picking the Right Size for a Tear-Off
Size follows two numbers: how many squares are coming off, and how many layers. A small roof in three-tab and a large roof in architectural can land on completely different container sizes even if the square footage looks similar on paper, because the weight per square is not the same material. See the full size guide for dimensions and driveway clearance on every size, or read the roof tear-off dumpster guide for a walk-through of sizing a real job.
When the tear-off is part of a larger renovation — new decking, gutters, siding — pair it with the broader construction dumpster rental page, since mixed renovation debris runs a different, lighter density than shingles alone.
What Else Can Go In With the Shingles
Felt paper, house wrap, old drip edge and flashing, and rotten decking pulled during the same tear-off can typically go in with the shingles — call out the decking specifically, since wet plywood adds real weight of its own. Arkansas's solid waste program, run through the Department of Energy and Environment's Office of Land Resources, permits the landfills this debris goes to — it is a helpful reference if a question comes up about where a load ends up.
What should not go in: wet or waterlogged tear-off material without a heads-up first, and any shingles suspected of asbestos content, which needs separate handling. Neither is common on a modern reroof, but both change the plan if they come up.
Suitability
Is roofing dumpster rental the right call?
The fastest way to get this right is to check the load against both lists before you book.
Good fits for this container
- Full roof tear-offs, three-tab or architectural
- Reroofs with one or two layers of old shingles
- Roofing contractors running back-to-back jobs
- Homeowners replacing a roof after hail or wind damage
- Detached garage or shed reroofs
- Roofs paired with new decking or fascia replacement
- Storm-damaged roofs needing a fast turnaround
Send these somewhere else
- Wet or waterlogged tear-off material without a heads-up (it weighs far more)
- Whole-house renovations mixing roofing with other debris (see construction dumpster rental)
- Loads with a large amount of metal roofing panels not mentioned up front
- Suspected asbestos-containing roofing material without separate handling
- Same-day mid-tear-off swaps without a scheduled call first
- Concrete or clay tile roofs without a heavier container arranged in advance
Sizing
Which container for roofing dumpster rental?
Every size below runs on this service. Match the material to the weight allowance and the volume takes care of itself.
- 10 yard — A single-layer three-tab tear-off on a small roof — garage, porch, or under roughly 10 squares.
- 15 yard — A small-to-mid three-tab tear-off, roughly 10–15 squares single layer, with room for extra layers.
- 20 yard — The common call for an average single-story home, roughly 15–20 squares of three-tab shingles.
- 30 yard — Larger tear-offs or architectural shingles, where the same square footage weighs noticeably more.
- 40 yard — Big architectural tear-offs or multi-layer removals where the tonnage adds up fast — confirm the math with us first.
| Size | Dimensions | Capacity | Weight included | Best for |
|---|---|---|---|---|
| 10 Yard Dumpster | typically about 12 ft long × 8 ft wide × 3.5 ft high | about 3-4 pickup truck loads | 1-2 tons | Bathroom remodels, garage or shed cleanouts, single-room flooring tear-outs and small yard-waste jobs. |
| 15 Yard Dumpster | typically about 16 ft long × 8 ft wide × 4 ft high | about 4-6 pickup truck loads | 2 tons | Kitchen or bath remodels, combined garage and attic cleanouts, small single-layer roof tear-offs. |
| 20 Yard Dumpster | typically about 22 ft long × 8 ft wide × 4.5 ft high | about 6-8 pickup truck loads | 2-3 tons | Whole-house flooring, average-size roof tear-offs, garage demolition, mid-size estate cleanouts. |
| 30 Yard Dumpster | typically about 22 ft long × 8 ft wide × 6 ft high | about 9-12 pickup truck loads | 3-4 tons | Whole-home renovations, large estate cleanouts, new-construction framing waste, commercial buildouts. |
| 40 Yard Dumpster | typically about 22 ft long × 8 ft wide × 8 ft high | about 12-16 pickup truck loads | 4-5 tons | New-construction sites, commercial demolition, major whole-house renovations, large storm debris cleanup. |
Roofing Dumpster Rental — the Northwest Arkansas specifics
Reroofs are a steady call across Benton County right now — the new-construction pace around Bentonville, Centerton, and Bella Vista means a lot of roofs going up for the first time, and NWA's ice storms have put plenty of older roofs on the replacement list too. Gravity is based off SW Aviation St near Louise M. Thaden Field, which keeps drivers close to Bentonville and Centerton roofing jobs and able to move fast across the rest of the service area.
Talk to a real person
Need roofing dumpster rental in Bentonville?
Call (479) 364-6780, describe the job in a sentence, and you will get a flat price and a delivery window on the same call.
Mon–Sat 7:00am – 6:00pm · Sun by appointment
Answers
Roofing Dumpster Rental — your questions answered
How much do a roof's shingles actually weigh?
It depends on the shingle type and layer count. Three-tab shingles run roughly 230–250 lb per square (100 sq ft). Architectural or laminated shingles run heavier, roughly 350–430 lb per square. A 20-square three-tab tear-off comes out to about 2.3–2.5 tons; the same 20 squares in architectural shingles runs about 3.5–4.3 tons. Each additional layer of old shingles adds roughly that same weight again.
What size dumpster do I need for a roof tear-off?
A single-layer three-tab reroof on an average single-story home (roughly 15–20 squares) usually fits a 20-yard container. The same size roof in architectural shingles, or a job with two layers coming off, often needs a 30-yard instead. Call with the square footage, shingle type, and layer count and we will size it from there.
Can I mix roofing debris with other renovation debris?
A little decking, felt paper, or flashing pulled during the same tear-off is fine. Large amounts of other construction material — drywall, siding, framing lumber — change the container's overall weight math and are better suited to the construction dumpster rental page, since mixed debris runs a different density than shingles alone.
Do you offer same-day delivery for roofing jobs?
Yes, same-day delivery is available across Northwest Arkansas depending on route timing and container availability, with next-day delivery reliable throughout the service area. Call ahead of a scheduled tear-off to lock in the size and timing.
What if my roof has two layers of shingles?
Mention it on the call — a second layer roughly doubles the shingle weight, which often bumps the recommended size up a step (a 20-yard job can turn into a 30-yard job with a second layer). Guessing on layer count is the fastest way to end up with an overweight load.
Service area
Roofing Dumpster Rental across Northwest Arkansas
We run roll-off containers out of our 2501 SW Aviation St yard in Bentonville to all seventeen Northwest Arkansas cities we cover — from Bella Vista and Centerton through Rogers and Springdale, out to Fayetteville and the smaller towns around them. Bentonville and the closest towns are usually same-day; the farther edges of the service area are next-day. If your town is not listed, call anyway. We likely still get there.